• Members 45 posts
    June 28, 2023, 4:01 a.m.

    Bob,
    From the beginning of DPRs uncertainty, I said (there and here) they would never be going away. From a corporate or divestment perspective it made zero sense and there had to be workings, behind the scenes, to keep them around, in one form or another. When this forum began as a sanctuary for those who were jumping ship (without waiting for the dust to settle) much ado was made about DPR - much of it unnecessarily derogatory and rude. Not from any of the DPRevived staff but from many of the trouble makers leaving DPR who were burning bridges behind them as fast as they could. They brought that vitriol with them and began to start fires here just as fast as they did there. It was obvious, mentioned, and met with too much "wait and see". I've seen many who came here, early on, post their leaving for these exact reasons. This forum can be just as accomplished as any other photography forum with proper formatting, content, moderation and contribution BUT not left as it has been for the first 3 months.

    It was mentioned above that many herein "know their stuff", and that's probably true but, just as true, there are many who think know their stuff and go out of their way to be as caustic as possible to make everyone know that they think they know their stuff. There's also a difference between knowing one's stuff and being a patient, caring teacher. You, I believe, are the latter. However, unless the unruly are cajoled, or cudgeled, into proper decorum, this forum will languish.

    I have a university MFA and a master's degree in photographic sciences (chemistry, physics, optics) & advertising and over 40 years as a full-time (when not teaching) professional photographer with clients consisting of governments, major advertising agencies, major/minor corporations, news agencies, galleries, collectors, magazines..... and I refrain from technical contribution because of the afore mentioned individuals (probably numbering 8-12) who have a need to impress others by beating them over and over with what they "think" they know - even when it possesses very little veracity. Or, when the information they contribute is correct, they insist on harassing anyone who questions their "knowledge" over the head until they stop engaging, tire and go away.

    I think that the original name for this forum "DPRevived" was, and is, an issue because it started, and now relies, on DPReview's demise. Which, of course, it never did so there is nothing to "revive". My suggestion is to reboot your efforts, to redirect this site into a calm, welcoming site (if that's what you want) that showcases your vision (the team) & your desire for a photographic forum, without any further mention, contention with, complaints about, or reference to DPReview and to make this site what you want it to be. The way it will flourish is if you provide a welcoming site for established members, and newcomers alike, to come and engage with like-minded individuals. Your 10-20 problem-children are NOT like-minded individuals and you've been told that since the first days of this forum. If they are permitted to continue on their current, and past (here and elsewhere) path, any semblance of sanity will be drained from here and you will be left with nothing but turmoil and months of hard work gone into nothing. Remember, it's your site and it will be what you allow it to be. If you allow it to be intolerant, rude and abusive, it will go away and the team will be left with that legacy. If you take the reins and make it what you want it to be, you will be successful and your site will reflect your vision. I will be here, when I'm not on assignment as I am now in Washington D.C., as I have for much of the past three months and post where, and when, those mentioned above are not involved in dragging the conversation into the gutter, with weeks of continued nonsense like the ongoing travesty about "what is exposure". Much of which is simply incorrect.

  • Members 206 posts
    June 28, 2023, 5:11 a.m.

    Some technique is brand specific.

  • Members 2365 posts
    June 28, 2023, 5:18 a.m.

    GB , you havent given anyone any advice from your experience only stated what settings can be altered. so what would you do in that situation 🤨

  • Members 4254 posts
    June 28, 2023, 5:26 a.m.

    Yes the name, afaik, was originally based on the assumption that DPReview would shut down but imo DPRevived (Digital Photography Revived) can still be appropriate for this site even now that DPReview will continue, at least for the foreseeable future.

    If the discussions here can be had in a polite, instructive and helpful manner for all levels of interests and skills then this site could very well in the future be seen as having "revived" digital photography compared to the "colosseum" the Beginners Questions and Open Talk forums can be on DPReview.

  • Members 4254 posts
    June 28, 2023, 5:30 a.m.

    That's probably because the question you are asking is clearly off-topic from the thread title - "Where we go from here"

    If you need help with your query perhaps start your own thread instead of attempting to hijack this one 🙂

    Why Are My Photos Noisy?

  • Members 2365 posts
    June 28, 2023, 5:31 a.m.

    Agree with all you have said. one of the main problems still sadly exists at DPR . i was just on the m43 forums and 2 threads have been locked, then in the same breath the mod that locked the 2 threads that were off topic ( who cares really) then posts his own off topic thread, what a hypocrite.

  • Members 4254 posts
    June 28, 2023, 5:53 a.m.

    Off-topic and another classic example of

    dprevived.com/media/attachments/a6/c2/vtYtYnmJnX5NJsqfmwFnWldOjGwA38PPDofQaCU6S8l8v2yMu0IIWgF5u8G6cp9r/babytantrum.gif

  • June 28, 2023, 8:26 a.m.

    Some great ideas here - thank you all. Keep posting if you feel like adding ideas.

    Yes, what has been said is on the lines that Bob and I discussed on Monday. It will take time to implement (turning tankers springs to mind 😁) but, with all your help, we will get there.

    Alan

  • Members 514 posts
    June 28, 2023, 8:33 a.m.

    A forum member already did this. I made my own page based on his code:

    whisperingcat.co.uk/wp/dprevived-shortcuts/

  • June 28, 2023, 9:57 a.m.

    Hmm - a 'my menu' option would be nice.

  • June 28, 2023, 10:03 a.m.

    This question presupposes that the beginner knows that there is noise on his photos. More likely is a question something like: "Why are there speckles and dots on my photos?" 😀

    David

  • June 28, 2023, 10:50 a.m.

    I think that there was a genuine cry of anguish from many people who had found DPReview to be an oppressive place for them. Then there were a lot of people who didn't, who said 'where's your problem'. I really don't like your characterisation of these people much. It kind of works on the assumption that they are mostly deliberate trouble makers, which I don't think they mostly are. They are likely people whose personality types lead them to create trouble, often unintentionally.
    FWIW, I also don't think that your theory of what happened at DPReview is remotely correct. I had enough conversations with the staffers there to know that they were genuinely distressed, and if Amazon was playing a game with them as well as us then that truly is heartless. Dale Baskin has come out with comments on it (which would get his post removed both here and on DPReview, and likely a permaban on the latter) which really does indicate that this wasn't a devious plot. Remember DPReview was an insignificant part of the Amazon empire. It's staff would have been 0.04% of those layed off by Amazon in 2023. I very much doubt that those planning the rationalisation even gave a thought to DPReview - just saw a few staff there that could easily be 'rationalised' and checked the box on the spreadsheet. What happened thereafter was very much the DPReview staff negotiating a way out in the face of a disinterested higher management.

    I hope I am both, they are not mutually exclusive. The problem is again that both sides in these arguments identify as the ones that 'know their stuff' and their interlocutors as the ones who only think that they know their stuff and are being caustic. The key thing is the stuff - and if you study these disputes, and know your stuff (because otherwise, how are you to determine which is which?), you find the same groups of people are in opposing camps, whatever the issue, and it is the same group that always knows the stuff correctly. When you get discussions within those groups, though they can sometimes get a little testy, that tends to be the limit. The real vitriol is between stuff knowledgable and stuff ignorant. Now, here is the problem - there is also seems to be a big correlation between the stuff ignorant and those calling for the other side to be 'cajoled or cudjeled'. The stuff is important, and if we are to judge on whether these unruly people are to suffer this treatment on whether they really do know their stuff, then it is exactly the ones calling for cajoling and cudgeling that will end up getting that treatment.

    Usually when people go the 'I have these qualifications route', I can outbid them. The whole approach is fallacious - 'believe me because I'm qualified'. I've had enough experience of qualifications to know that many, maybe a majority who exit higher education with degrees end up without a great depth of knowledge about their subject. The pass criterion is in any case 'bare competence' and the whole assessment regime in most cases is extremely gameable and only produces a superficial correlation with competence, yet again knowledge. This is why statutory professions (i.e, when competence actually matters) never accept simple college degrees as the sole criterion for full membership.

    I think there is a test of the type of conversation that you describe. If it is a matter of both sides just making declarations that they know best, then sure, it's a valueless conversation. But I don't see very many like that. Maybe one or two individuals, and even there I think your estimation that their intent is to 'impress everyone' is dismissive and pejorative. If someone believes that they are right, and that is questioned, they will usually argue. That's human nature. If it's a topic for which they have some passion, and much of their self-esteem and identity have become tied up in it, then that gets much more pronounced. My observation of these kinds of discussion is that they are very often between party A, who is a professional photographer, very invested in their own expertise and party B, who is maybe an engineer or scientist from a different (but often closely related) discipline, who is usually a photographer of the type you'd call 'serious amateur' (though quote often also professional). The usual pathology is that party A deploys the 'I'm professional' argument, and party B deploys 'technical' arguments based around evidence and reason. Party B is, of course, the one that knows his stuff (or at least the stuff relevant to the discussion). In the process, Party B will usually be accused of only thinking that they know their stuff, trying to impress others, beating their interlocutor over and over, and harassing anyone who questions their knowledge - and on a place like DPReview, will get trolled and likely sanctioned by moderators.

    I'm not sure the site's name is really a big issue - at least not for now. As for the DPReview heritage - it is what it is. Whether it redirects into a calm, welcoming site depends on the membership. Trying to calm it with punitive action will surely drive out the very people who make this site different from DPReview - it's in our worst interests.

    Yes, we've had people beating us over and over with their opinions on that. Quite a few (and I'm not saying you) clearly do not have the interests of this site at heart. And also, we've had a significant group of people telling us that they think that this place is much more friendly and welcoming on DPReview. I can understand that, because group bullying is a huge problem there, and many of the people who would prefer this site over DPReview are those that have suffered from it.

    So, what should we do about exposure? Maybe we have a site policy about what exposure means, and anyone who disagrees about that (and dares to mention it) be excluded from the site? Or what?

  • Members 1963 posts
    June 28, 2023, 11:42 a.m.

    Don.

    Out of curiosity I took a look at that corner of the internet that you mention.

    Nothing has changed, the same old same, in the "off topic" post you mention, with the insecure fanboys, talking down other systems.

    It all seems far more mature here in the threads that deal with camera gear.

  • June 28, 2023, 11:57 a.m.

    I'm not convinced. It's best to credit beginners with some intelligence and initiative. If you're a 'beginner' on a photography forum these days it's probable that you're not someone content with taking phone pictures. You've invested in a specialist camera, and likely done a bit of research using the many web sites to make your purchase decisions. It's very likely that when you read the review for you camera that 'noise' was mentioned, so you picked up the term. Maybe you want to one of the many photographic tutorial sites, or YouTube videos, and they will have talked about noise - and then very likely told you nonsense about what causes it.
    So, when you come to be sufficiently proactive you go to a 'beginner's questions' forum and ask for the stuff all those sites didn't give you. Very often when beginners ask questions like that it's because they are told that high ISO causes noise, but they are keeping the ISO low and the picture still looks more noisy than they expected, now they want to know why.

  • Members 449 posts
    June 28, 2023, 12:05 p.m.

    Hi,

    It never ceases to amaze me that so many folks can never see that the gear is just a tool to get a particular job done. And there is always a particular set of gear which best fits. Sometimes one needs to mount a medium format lens on a small format body with a tilt/shift adapter, for example. All that matters when talking manufacturer is which lens and which body best fills the bill.

    One of the things I really like here -which I have already mentioned, but it's worth revisiting- is we have a Threads view and I am getting -cough- exposure -cough- to other gear which I would otherwise never look into a particular forum for it.

    I mean, I'm still actively using a Kodak 760 on a copy stand with macro lenses as a wide-field microscope. This, because the Nikon F5 body it has offers a swappable viewfinder. In this use, I either put on the magnifier viewfinder, or use none at all. Perhaps there is something else out there which lends itself to being a better tool for this job.

    And that's all it is. A tool in my electronics lab to document failure areas on circuit boards. Nothing of the artistic part of photography about it. And photos only worth sharing with the folks at the company whom I am performing the failure analysis for. Talk about boring shots!

    On the other hand, if anyone ever shows up with the question of How Do I Do This Sort Of Thing, I can help there. ;)

    Stan

  • Members 45 posts
    June 28, 2023, 1:39 p.m.

    The final test of "qualifications" is how one uses them. In medicine, it's about keeping patients alive and well. If you don't accomplish that, you won't be working at any appreciable level for long. In photography, it's the same. One's qualifications might get you in the door but if you don't provide clients with what they want, you won't be working for very long. Qualifications aren't about who can "outbid" another but what one does with them. My 40 years of continued work, with extensive wait list, speaks for itself - which is what one's work should do. That said, I am on assignment in Washington, D.C. and am preparing today's call sheet. Now that my tea is finished, I must go. We have streets shut down here so the work can continue later today and I must be ready. 😎

  • June 28, 2023, 1:58 p.m.

    Reminds me of when I was in college. The 'pass mark' was 40% and you got the top level by achieving 80%. Part of my course was going into industry. I soon learned that if you got 80% right, you got 20% wrong - and failed (this was computing). So, it had to be RIGHT - not "Mostly right". Guess what - I went back to college for my final year and did rather well 😁😁

    And, of course, once you go to work full time, you soon learn the things that make you successful - and it's probably not what you were taught at college.

    Alan

  • June 28, 2023, 2:08 p.m.

    With respect, it was you that raised the issue of qualifications, and implying that those qualifications meant that you knew 'the stuff'. Maybe I got it wrong, but if that wasn't the intention, I don't see why you'd raise the matter. The connection between your qualifications and your subsequent career, I find beside the point. I've known very successful photographers with zero formal qualifications and also people with top-rate qualifications that haven't had successful careers.